Running a small cabinet shop (1–10 people) means every estimate and every hour in the shop has to count. This guide on How to Price Custom Cabinets: The Only Formula Small Shops Need is written for that reality — practical, shop-tested, and focused on what helps a small shop make money and keep customers happy.
What follows isn’t theory. It’s the process, numbers, and checklists that work when you’re the owner, builder, and installer in the same week.
The Real Cost Breakdown Most Shops Miss
Most bids die on hidden costs. Four buckets: Materials (sheet goods, hardwood, hardware, finish + 10-12% waste), Direct Labor (build/finish/install timed, not guessed), Overhead (rent, insurance, truck, utilities, software), Profit (planned, not leftover). Skip one and you funded the customer’s kitchen.
Pull last three invoices and timesheets. Rebuild the job with actual hours including the Saturday fix. Most shops discover 18-30% underpricing. That’s not a market problem — it’s math you can fix this week. Start with one job, then roll the real numbers into your template.
| Item | Small Shop Range | Notes |
|---|---|---|
| Materials + waste | $1,800–$4,800 | Confirm price today |
| Labor @ $80/hr | 45–85 hrs | Finishing is 30-40% |
| Target gross margin | 48–55% | Below 42% = fix pricing or hours |
In practice, pull one recent kitchen and rewrite the estimate with these four buckets side-by-side with what you actually charged. You’ll see the leak in 20 minutes — usually labor or finishing. Keep that sheet as your real template, not the one you wish was right.
Shop Rate: The Math That Sets Your Floor
Shop rate isn’t your wage. It’s what the shop must bill per hour to cover overhead and pay you.
Example: Overhead $40k (rent $18k + insurance $6k + utilities $4k + vehicle $7k + other $5k) + desired salary/profit $75k = $115k ÷ 1,400 billable hrs (28 hrs/week × 50) = $82/hr floor. Many shops charge $55 and bleed slowly. In 2026 most US small shops need $75-$95/hr. Recalculate quarterly when overhead or billable hours shift, and put that rate at the top of every estimate.
Test it: take last month’s shop bills and divide by billable hours you actually logged. If your rate was $65 but math says $84, your next three estimates are already underpriced. Fix the rate before you market more.
Live Example: Pricing a 10x10 Kitchen
12-box 10×10 L-shaped shaker, painted, soft-close: 11 sheets maple ply $1,078 + 6 sheets MDF $280 + Blum $780 + finish $420 + misc $250 = $2,808 +10% waste = $3,089. Labor 32 build +18 finish +16 install =66 hrs @ $82 = $5,412. Subtotal $8,501 +25% profit $2,125 = $10,626 + tops/delivery/tax.
If that feels high, don’t cut profit — cut hours. Standardize box sizes, outsource doors, or clarify scope. The job that’s priced right and built efficiently is the one that gets you a referral, not the one you discounted to win.
| Item | Small Shop Range | Notes |
|---|---|---|
| Materials + waste | $1,800–$4,800 | Confirm price today |
| Labor @ $80/hr | 45–85 hrs | Finishing is 30-40% |
| Target gross margin | 48–55% | Below 42% = fix pricing or hours |
Run this same walkthrough with your numbers: your sheet cost, your hardware cost, your hours from the last kitchen. Write it on one page and keep it in the truck. Real numbers beat industry averages every time you bid.
Change Orders, Extras, and Pushback Scripts
Every extra without a signed change order is a donation. Keep a one-page form: description, cost, time impact, and signature. Price before work, never after.
For “too expensive”: reframe with options. “There’s a $7,200 slab/standard-finish version and the $10,600 conversion-varnish version. Which fits what you want?” Options beat discounting. Let bad-fit jobs walk — a cheap job never buys a good referral, and it teaches customers to push every time.
Write your change-order script on a card and keep it at the desk. When the customer says “can you just…”, you don’t ad-lib — you read it. Calm, clear, and signed before the saw starts.
Estimating Faster Without Underbidding
Speed comes from templates, not rushing. Standard box sizes, one cutlist format, and a checklist for what’s included/excluded. Time your last four estimates. If you’re averaging 90 minutes each, a template and a one-page price sheet cuts it to 25-30 and kills the “forgot the toe kick” errors that eat profit.
Build a library of three past estimates (small galley, L-shaped, large U) with real invoices. Copy, adjust, send. You’re not reinventing — you’re refining.
Take this to the next job: write the one change on the job card, time it, and note the result. After three jobs you’ll know if it saves an hour or is just theory. Small shops win by testing one thing, not debating ten.
Overhead and Waste: The Silent Margin Killers
Overhead hides in small drips: blades, sandpaper, finish waste, delivery fuel, rework, and the estimate you wrote for free. Build it into the rate (15-20%) so every hour carries it. Don’t “add overhead at the end” — it’s the first thing customers negotiate away.
One fix: at month end, total your non-material shop costs and divide by billable hours. If the rate moved $6/hr, update your sheet that day. Small shops that update quarterly stay profitable; those that don’t subsidize every kitchen.
At month-end, list every shop cost that wasn’t material — even $12 blades. Divide by jobs that month. That per-job overhead number is what your rate must carry, not what you hope remains.
Raising Prices Without Losing Work
Raise on new inquiries first, not existing backlog. Add 8-12%, keep your close rate above 35%, then raise again next quarter. Tell prospects: “Lead time is 8 weeks, material pricing valid 14 days.” Scarcity and clarity sell better than apologizing for price.
If close rate stays above 50%, you’re still too cheap. If it drops below 25%, check if your portfolio and reviews justify the new price before cutting — often it’s positioning, not pricing.
Take this to the next job: write the one change on the job card, time it, and note the result. After three jobs you’ll know if it saves an hour or is just theory. Small shops win by testing one thing, not debating ten.
Common Questions
How long does it take to fix how to price custom cabinets: the only formula small shops need in a small shop? One job cycle. Put the checklist on the next estimate or build, debrief for 15 minutes after, and lock the fix. Two jobs and it’s habit.
What should it cost? Most fixes are $0–$800 in time. If a tool or software is needed, $200–$1,500 — compare to one avoided rework day. It usually pays for itself in one kitchen.
Can I do this solo? Yes. These systems are built for owner-operators. Helpers make them faster, not possible. Batch, standardize, and keep one-page SOPs.
What’s the biggest mistake shops make with how to price custom cabinets: the only formula small shops need? Guessing instead of measuring. Time two jobs, price from real hours and invoices, and the third estimate is right.
How do I know it’s working? Track one metric for three jobs: gross margin, hours per box, close rate, or rework hours. If it moves the right way, keep it.
Next Steps
Pick one action from this guide on How to Price Custom Cabinets: The Only Formula Small Shops Need and apply it to your next job. Update the template, time it, debrief for 10 minutes, and roll the fix into your standard. That’s how a small shop gets more profitable without working more hours.